About Us

Bunbury retaining walls components consist of concrete post and panels, all steel reinforced. The 'H' shaped posts are set into holes dug approximately 113cm apart. The depth of the holes must equal the height of the retaining wall required (max depth 1200mm). Walls up to 1.5m high can be constructed.

Equal pressures are then created above and below ground level (a cantilever effect). The posts are then aligned, levelled and anchored in a concrete footing. The panels are then inserted into and down the tracks of the posts. The bottom panels are supported by the footing around each post. Each panel interlocks and raises the height of the wall in 150mm increments.

Our Walls

Available in natural cream, limestone or economical plain textures
Quick, clean & easy installation by yourself or our professional teams
Shire approved & engineer designed for your security
Maintenance free - will not fade or deteriorate
Suitable for domestic & commercial situations
Obligation free on-site assessment

Pricing Here

Professional Installation

Retaining walls must be constructed according to engineering specifications!

The following direction describe the stages of a common method of installation

1.Set up a string line between two stakes

positioned at each end of the required wall.

2.Dig the first two post holes to the depth and

diameter indicated above, and with centres

1.13m apart. (It is better to dig the holes too

deep and add more sand than to dig too

shallow and have to lift the post out to deepen

the hole)

Please click here to read more of the stages of a common method installation.

DIY

For detailed instruction on how to install a retaining wall click here

Bunbury Gardening & Lawnmowing