Fire Extinguisher

If you're confronted with a fire, you need to be confident that your extinguisher is of the highest quality. FireSafe CO2 Extinguishers are assembled in Australia under an accredited ISO 9001 Quality Management System and are approved to AS/NZS 1841.

Carbon Dioxide is clean gas which does not leave any harmful residue making it an ideal extinguisher for use where sensitive electronic equipment is present. CO2 is non corrosive and non conductive and is also suitable for small fires involving flammable and combustible liquids.

Fire Blankets

With the majority of fires in the home originating in the kitchen, fire blankets are an essential safety item to smother a fire caused by burning oil or fat in the stove. Locate your fire blanket near the entrance/exit to your kitchen.

In the event of a fire, simply pull the tabs to release the blanket from its casing, hold vertically and place gently over the flaming vessel, completely covering the fire. Turn off the power as soon as it is safe for you to reach the switch.

Service & Inspection

It is important that your fire extinguishers are inspected at regular intervals to insure that it is ready for use in case of an emergency.

Extinguisher Services Pty Ltd can provide you with a service and inspection to give assurance that your extinguisher is fully charged and ready for use. The inspection generally involves checking that the extinguisher is located in its proper place, that it has not been used or tampered with, and that there is no physical damage or condition to prevent it from functioning.

Installation

The team at Extinguisher Services Pty Ltd are thoroughly trained so that they understand the equipment being installed and the importance of continual upkeep in order to achieve utmost effectiveness.

Each of our servicemen take pride in their work, and will ensure that all components are installed to the highest standard and according to specifications.

Fire Extinguisher Recharging

A pressure test checks the extinguisher cylinders for structural faults. It is important to perform periodic maintenance to be sure that they are ready to operate properly and safely.

Extinguisher Services Pty Ltd has the trained professionals who can carry out this maintenance for you in accordance to Australian Standards.

Pressure Testing is Required if:

It has been 5 years since your extinguisher has been tested.
There is no written test record for the extinguisher
The extinguisher appears to have been exposed to physical damage or abuse.

If your extinguisher is showing visual signs of defect it will be inspected and tested as necessary before recharging.

Fire Extinguisher Services of Rydalmere